ଛାଞ୍ଚ:Infobox mountain/doc

This is a documentation subpage for ଛାଞ୍ଚ:Infobox mountain.
It may contain usage information, categories and other content that is not part of the original ଛାଞ୍ଚ page.

This template is used on approximately ୨୮,୦୦୦ pages and changes may be widely noticed. Test changes in the template's /sandbox or /testcases subpages, or in your own user subpage. Consider discussing changes on the talk page before implementing them.

This template uses Lua:

Wikidata-enabled

Simply add {{Infobox mountain}} to the top of an article, and the data will be automatically included from Wikidata. If necessary, these values can be overridden by passing local values to the relevant parameters in the article:

{{Infobox mountain
| name = [local value]
}}

To add data to Wikidata, please see the Parameters section below.

Standard usage

ଛାଞ୍ଚ:Infobox mountain/sandbox

{{Infobox mountain/sandbox
| name                  = 
| other_name            = 
| photo                 = 
| photo_size            = 
| photo_alt             = 
| photo_caption         = 
<!-- MAP CODE TBA -->
<!----------------------- HIGHEST POINT -->
| highest               = 
| highest_location      = 
| elevation             = 
| elevation_m           = 
| elevation_ft          = 
| elevation_ref         = 
| elevation_system      = 
| prominence            = 
| prominence_m          = 
| prominence_ft         = 
| prominence_ref        = 
| parent_peak           = 
| isolation             = 
| isolation_m           = 
| isolation_ft          = 
| isolation_ref         = 
| isolation_parent      = 
| listing               = 
| coordinates           = 
| coordinates_ref       = 
<!----------------------- DIMENSIONS -->
| length                = 
| length_km             = 
| length_mi             = 
| length_orientation    = 
| length_ref            = 
| width                 = 
| width_km              = 
| width_mi              = 
| width_orientation     = 
| width_ref             = 
| area                  = 
| area_km2              = 
| area_mi2              = 
| area_ref              = 
| volume                = 
| volume_km3            = 
| volume_mi3            = 
| volume_ref            = 
<!----------------------- NAMING -->
| etymology             = 
| nickname              = 
| native_name           = 
| native_name_lang      = 
| translation           = 
| pronunciation         = 
| authority             = 
<!----------------------- GEOGRAPHY -->
| country               = 
| country_type          = 
| state                 = 
| state_type            = 
| location              = 
| region                = 
| region_type           = 
| district              = 
| district_type         = 
| part                  = 
| part_type             = 
| settlement            = 
| settlement_type       = 
| range_coordinates     = 
| range_coordinates_ref = 
| parent                = 
| border                = 
| grid_ref_UK           = 
| grid_ref_UK_ref       = 
| grid_ref_Ireland      = 
| grid_ref_Ireland_ref  = 
| topo_maker            = 
| topo_map              = 
| biome                 = 
<!----------------------- GEOLOGY -->
| formed_by             = 
| orogeny               = 
| age                   = 
| type                  = 
| geology               = 
| volcanic_region       = 
| last_eruption         = 
<!----------------------- CLIMBING -->
| first_ascent          = 
| easiest_route         = 
| normal_route          = 
| access                = 
}}

Parameters

Parameter	Default value	Description
Lead section
name	Wikidata label in the local language	Name of the mountain, peak or hill.
other_name		Other name for the mountain. See `native_name` if the name is in a different language.
photo	Image on Wikidata	Photograph of the mountain. Preferably a distance shot to show most/all of the mountain rather than a view from the summit.
photo_size	300px	The image width in pixels.
photo_alt	`photo_caption`	Alt text for the photo.
photo_caption	(P2096) stated on image	Description of the photograph.
<maps>	TBA	TBA
Highest point
highest	ସମୁଦ୍ର ପତ୍ତନଠାରୁ ଉଚ୍ଚତା (P2044) with qualifier ନାମ (P2561)	Name of the highest summit of a single mountain or peak.
highest_location	ସମୁଦ୍ର ପତ୍ତନଠାରୁ ଉଚ୍ଚତା (P2044) with qualifier ଅବସ୍ଥାନ (P276)	Location of highest summit.
elevation	ସମୁଦ୍ର ପତ୍ତନଠାରୁ ଉଚ୍ଚତା (P2044)	Summit elevation, without auto-conversion. You may wish to use `{{Convert\|xxx\|m\|ft\|abbr=on}}`
elevation_m		Summit elevation in metres, with auto-conversion.
elevation_ft		Summit elevation in feet, with auto-conversion.
elevation_ref	N/A	Optional parameter to add a suffix to the `elevation` parameters (such as a reference).
elevation_system	ସମୁଦ୍ର ପତ୍ତନଠାରୁ ଉଚ୍ଚତା (P2044) with qualifier (P459)	The elevation reference system that defines the elevation, e.g., NAVD88 or DE-NHN
prominence	(P2660)	Topographic prominence, without auto-conversion. You may wish to use `{{Convert\|xxx\|m\|ft\|abbr=on}}`
prominence_m		Topographic prominence in metres, with auto-conversion.
prominence_ft		Topographic prominence in metres, with auto-conversion.
prominence_ref	N/A	Optional parameter to add a suffix to the `prominence` parameters (such as a reference).
parent_peak	(P3137)
isolation	(P2659)	Topographic isolation, without auto-conversion. You may wish to use `{{Convert\|xxx\|km\|mi\|abbr=on}}`
isolation_km		Topographic isolation in kilometres, with auto-conversion.
isolation_mi		Topographic isolation in miles, with auto-conversion.
isolation_ref	N/A	Optional parameter to add a suffix to the `isolation` parameters (such as a reference).
isolation_parent	(P2659) with qualifier (P2210)	Name of the landform the summit is isolated from.
listing	ଏହା ଯାହାର ଅଂଶ (P361)	Name of a relevant list of mountains that the peak belongs to. See List of mountain lists for examples.
coordinates	ଭୂଜକୋଟି (P625)	Coordinates of the highest point or peak.
coordinates_ref	N/A	Optional parameter to add a suffix to the `coordinates` parameter (such as a reference).
Dimensions
length	ଦୈର୍ଘ୍ୟ (P2043)	Length of the mountain or peak, without auto-conversion. You may wish to use `{{Convert\|xxx\|km\|mi\|abbr=on}}`
length_km		Length in kilometres, with auto-conversion.
length_mi		Length in miles, with auto-conversion.
length_orientation	ଦୈର୍ଘ୍ୟ (P2043) with qualifier (P7469) as: ଅକ୍ଷାଂଶ (Q34027) (for EW) or ଦ୍ରାଘିମା (Q36477) (for NS)	Length orientation.
length_ref	N/A	Optional parameter to add a suffix to the `length` parameters (such as a reference).
width	ପ୍ରସ୍ଥ (P2049)	Width of the mountain or peak, without auto-conversion. You may wish to use `{{Convert\|xxx\|km\|mi\|abbr=on}}`
width_km		Length in kilometres, with auto-conversion.
width_mi		Length in miles, with auto-conversion.
width_orientation	ପ୍ରସ୍ଥ (P2049) with qualifier (P7469) as: ଅକ୍ଷାଂଶ (Q34027) (for EW) or ଦ୍ରାଘିମା (Q36477) (for NS)	Width orientation.
width_ref	N/A	Optional parameter to add a suffix to the `width` parameters (such as a reference).
area	(P2046)	Footprint of the mountain or peak, without auto-conversion. You may wish to use `{{Convert\|xxx\|km2\|mi2\|abbr=on}}`
area_km2		Footprint of the mountain or peak in square kilometres, with auto-conversion.
area_mi2		Footprint of the mountain or peak in square miles, with auto-conversion.
area_ref	N/A	Optional parameter to add a suffix to the `area` parameters (such as a reference).
volume	(P2234)	Volume of the mountain or peak, without auto-conversion. You may wish to use `{{Convert\|xxx\|km3\|mi3\|abbr=on}}`
volume_km3		Volume of the mountain or peak in cubic kilometres, with auto-conversion.
volume_mi3		Volume of the mountain or peak in cubic miles, with auto-conversion.
volume_ref	N/A	Optional parameter to add a suffix to the `volume` parameters (such as a reference).
Naming
etymology	ନାମରେ ନାମିତ (P138)	Origin of name
nickname	(P1449)
native_name	ମାତୃଭାଷାରେ ନାମ (P1559)	Name in local language. If more than one, separate using {{Plain list}} and {{native_name}}.
native_name_lang	ମାତୃଭାଷାରେ ନାମ (P1559)	ISO 639-2 code of `native_name`.
translation	ମାତୃଭାଷାରେ ନାମ (P1559) with qualifier (P2441)	Translation of name to English (if name is not an English name)
pronunciation	(P898)	Use an appropriate IPA-xx template, replacing 'xx' with the ISO code for the language. (See {{IPA-en}} for English.)
authority
Geography
country	ଦେଶ (P17)	Country(ies) of the peak or mountain.
country_type		Optional parameter to override the default "Country" label.
state	ପ୍ରଶାସନିକ ବିଭାଗ ଅନ୍ତର୍ଗତ (P131)	To be updated to `subdivision1`. State(s) of the peak or mountain.
state_type		To be updated to `subdivision1_type`. Optional parameter to override the default "State" label.
location	ଅବସ୍ଥାନ (P276)	Free-form field to describe the location.
region		To be updated to `subdivision2`. Region(s) of the peak or mountain.
region_type		To be updated to `subdivision2_type`. Optional parameter to override the default "Region" label.
district		To be updated to `subdivision3`. District(s) of the peak or mountain.
district_type		To be updated to `subdivision3_type`. Optional parameter to override the default "District" label.
part		To be updated to `subdivision4`. Subdivision(s) of the peak or mountain.
part_type		To be updated to `subdivision4_type`. Optional parameter to override the default "Subdivisions" label.
settlement		Settlement(s) on/around the peak or mountain.
settlement_type		Optional parameter to override the default "Settlement" label.
range_coordinates
range_coordinates_ref	N/A	Optional parameter to add a suffix to the `range_coordinates` parameter (such as a reference).
range	(P4552)	The mountain range (specific subgroup) that the mountain/massif/range. I.e. Bernese Alps, not Alps.
border	(P4777)	For multiple borders use `border1` `border8`. Use `district_type` for custom label
grid_ref_UK	(P613)	If the mountain is in Great Britain, the British grid reference. Use `grid_ref_UK_note` to add a suffix note.
grid_ref_Ireland	(P4091)	If the mountain is in Ireland (whether Northern Ireland or the Republic), the Irish grid reference. Use `grid_ref_Ireland_note` to add a suffix note.
topo_maker		The publisher of the topographic map that contains the range
topo		The name of the topographic map that contains the range
topo_map
biome		Biome(s) for range
Geology
formed_by
orogeny
age		Age of the rock. Geologic time scales may be useful here. Use `period`, `period1` through `period5` for multiple values.
type
rock		Type of the rock mountain is made from. Use `geology`, `geology1` through `geology5`, for multiple types.
volcanic_arc/belt		If the mountain is a volcano. Alternatives: `volcanic_arc`, `volcanic_belt`, `volcanic_field`
last_eruption		The date of the last eruption if the mountain is of volcanic origin.
Climbing
first_ascent		Date of the first recorded ascent.
easiest_route		The easiest route to the summit. Some possibilities include Hike, Scramble or any of the YDS grades.
normal_route
access

Advanced uses

Parameter	Default value	Description
qid
suppressfields
fetchwikidata
onlysourced
child
embed
embedded
misc
module

Duplicate parameter cleanup

Rename parameters
From	To
Duplicates
`photo_width`	`photo_size`
`coords`	`coordinates`
`topo`	`topo_map`
`relief`	`map_relief`
`parent`	`range`
`language`	`native_name_lang`
`image_map`	`map_image`
`coords_ref`	`coordinates_ref`
`coordinates_note`	`coordinates_ref`
`elevation_note`	`elevation_ref`
`city_type`	`settlement_type`
Renames
`type`	`mountain_type`
`state_type`	`subdivision1_type`
`region_type`	`subdivision2_type`
`district_type`	`subdivision3_type`
`part_type`	`subdivision4_type`
`range_coordinates_note`	`range_coordinates_ref`
`grid_ref_Ireland_note`	`grid_ref_Ireland_ref`
`grid_ref_UK_note`	`grid_ref_UK_ref`
`length_note`	`length_ref`
`width_note`	`width_ref`

Consolidate parameter series as comma separated values
Source (in order)	Destination
`bordering_range`	Move contents to `bordering_range`, in the same order.
`border`
`border1`
`border2`
`border3`
`border4`
`border5`
`border6`
`border7`
`border8`
`volcanic_region`	Move contents to `volcanic_region`, in the same order.
`volcanic_arc/belt`
`volcanic_arc`
`volcanic_belt`
`volcanic_field`
`geology`	Move contents to `geology`, in the same order.
`geology1`
`geology2`
`geology3`
`geology4`
`geology5`
`rock`
`age`	Move contents to `age`, in the same order.
`period`
`period1`
`period2`
`period3`
`period4`
`country`	Move contents to `country`, in the same order. For articles that used `country1`, please append the additional parameter `\|country_type=Countries`.
`country1`
`country2`
`country3`
`country4`
`country5`
`country6`
`country7`
`country8`
`settlement`	Move contents to `settlement`, in the same order. For articles that used `settlement1` or `city1`, please append the additional parameter `\|settlement_type=Settlements`.
`settlement1`
`settlement2`
`city`
`city1`
`city2`
`city3`
`city4`
`city5`
`city6`
`city7`
`city8`
`city9`
`city10`
`city11`
`city12`
`city13`
`city14`
`city15`
`city16`
`subdivision1`	Move contents to `subdivision1`, in the same order. • For articles that use `state`, please append the additional parameter `\|subdivision1_type=State`. • For articles that use `state1`, please append the additional parameter `\|subdivision1_type=States`.
`state`
`state1`
`state2`
`state3`
`state4`
`state5`
`state6`
`state7`
`state8`
`subdivision2`	Move contents to `subdivision2`, in the same order. For articles that use `region1`, please append the additional parameter `\|subdivision2_type=Regions`.
`region`
`region1`
`region2`
`region3`
`region4`
`region5`
`region6`
`region7`
`region8`
`region9`
`region10`
`region11`
`region12`
`region13`
`region14`
`region15`
`region16`
`region17`
`region18`
`region19`
`region20`
`region21`
`region22`
`region23`
`subdivision3`	Move contents to `subdivision3`, in the same order. For articles that use `district1`, please append the additional parameter `\|subdivision3_type=Districts`.
`district`
`district1`
`district2`
`district3`
`district4`
`district5`
`district6`
`district7`
`district8`
`district9`
`subdivision4`	Move contents to `subdivision4`, in the same order. For articles that use `part1`, please append the additional parameter `\|subdivision4_type=Subdivisions`.
`part`
`part1`
`part2`
`part3`
`part4`
`part5`
`part6`
`part7`
`part8`
`part9`
`part10`
`part11`
`part12`
`part13`
`part14`
`part15`
`part16`

Template Data

Click the [show] link to the right to display the TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Infobox mountain in articles based on its TemplateData.

TemplateData for Infobox mountain

This template is used to create an infobox for an article about a mountain.

Template parameters
Parameter		Description	Type	Status
Name	`name`	Name of the mountain, peak or hill. If more than one mountain by the name exists, the article is likely disambiguated but this name in the infobox should be the undisambiguated name. For example, Mount Columbia (for Mount Columbia (Canada) or Mount Columbia (Colorado).	String	required
Other name	`other_name`	An alternate English name for the mountain, e.g., "Mount McKinley" for Denali. Quotes can be used as normal to italicize or bold the text if desired.	String	optional
Etymology	`etymology`	The etymology of the name	String	optional
Native name	`native_name`	The name of the mountain in the local language, if not English.	String	optional
ISO 639 language code	`native_name_lang`	The ISO 639 code for the language of the mountain name (if not English). e.g., "fr" for French	String	optional
Language	`language`	Language of mountain name.	String	optional
Translation	`translation`	Translation of the mountain's name into English	String	optional
Pronunciation	`pronunciation`	Use an appropriate IPA-xx template, replacing 'xx' with the ISO code for the language. (See {{IPA-en}} for English.)	String	optional
Photo	`photo`	Photograph of the mountain. Preferably a distance shot to show most/all of the mountain rather than a view from the summit. Do not include the "File:" prefix. If uploading a new image, please put them on Commons so they can be easily used by the other language Wikipedias. If the only image available is less than 280px wide, you can use the photo_size parameter to indicate its size.	String	optional
Photo alt	`photo_alt`	Alt text for the photo, primarily for visually impaired readers. See Wikipedia:Alternative text for images.	String	optional
Photo caption	`photo_caption`	Description of the photograph which is displayed below. Include the month and year if known.	String	optional
Map	`map`	The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The coordinate fields position a pushpin coordinate marker and label on the map automatically. Example see: Mount Everest. For a static image, use map_image	String	optional
Map	`map_image`	The file name of a static map image to be displayed. For a [[Template:location map\|location map]], use map	String	optional
Map alt	`map_alt`	Alt text for the map, primarily for visually impaired readers. See [[Wikipedia:Alternative text for images#Maps]].	String	optional
Map caption	`map_caption`	Fill out if a map caption is desired. If not specified, location will be used.	String	optional
Location	`location`	Province or state first, followed by country. For USA, the county is optional but if given, be provided before the state. If a pushpin map is being used, the location will be used for the map's caption unless the map_caption parameter is set.	String	optional
Map relief	`map_relief`	If a location map template is specified, this template will attempt to display a relief map if one is available. To force the default map image to display set to 0.	String	optional
Label	`label`	Label to be used for the mountain's location on the map. If not specified, the value of the name parameter is used.	String	optional
Label position	`label_position`	The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}. Default right	Line	optional
Elevation	`elevation`	Maximum height of the mountain. If the mountain has multiple high points, use the highest. Metres should be used first for all mountains outside of the United States and feet for those within the U.S. For conversions, use elevation_m for metres to feet or elevation_ft for feet to metres. This field is required.	String	optional
Elevation (meters)	`elevation_m`	Maximum height of the mountain, metres.	String	optional
Elevation (feet)	`elevation_ft`	Maximum height of the mountain, feet.	String	optional
Elevation ref	`elevation_ref`	Reference for the elevation using the standard <ref> </ref> tags. If elevation_m/elevation_ft was used, the reference must be supplied using this parameter.	String	optional
Prominence	`prominence`	The clean topographic prominence of the summit. For conversions, use prominence_m for metres to feet or prominence_ft for feet to metres.	String	optional
Prominence (meters)	`prominence_m`	The clean topographic prominence of the summit, metres.	String	optional
Prominence (feet)	`prominence_ft`	The clean topographic prominence of the summit, feet.	String	optional
Prominence ref	`prominence_ref`	Reference for the prominence using the standard <ref> </ref> tags.	String	optional
Parent peak	`parent_peak`	In computation of prominence, peaks form a hierarchy: this is the parent of the peak in the hierarchy. For more information, see Line parent.	String	optional
Listing	`listing`	Name of a relevant list of mountains that the peak belongs to. See List of mountain lists for examples.	String	optional
Range	`range`	Mountain range if applicable. The specific range subgroup should be provided instead of any major mountain system unless there is no applicable subgroup. For example, use Teton Range and not Rocky Mountains or Bernese Alps not Alps.	String	optional
Coordinates	`coordinates` `coords`	The latitude and longitude of the summit using the {{coord}} template with display=inline,title. If the article uses a geolinks template in the external links section, do not use the display parameter.	String	optional
Topo	`topo`	Topographic map	String	optional
Grid ref (UK)	`grid_ref_UK`	Ordnance Survey (UK) grid reference for the mountain, passed to {{gbm4ibx}}.	String	optional
Notes for grid_ref_UK	`grid_ref_UK_note`	Notes for grid_ref_UK, e.g., a citation.	Unknown	optional
Grid ref (Ireland)	`grid_ref_Ireland`	Ordnance Survey(Ireland) grid reference for the mountain, passed to {{iem4ibx}}.	String	optional
Notes for grid_ref_Ireland	`grid_ref_Ireland_note`	Notes for grid_ref_Ireland, e.g., a citation.	Unknown	optional
Coordinate type	`coord_type`	Type, from [[Wikipedia:WikiProject Geographical coordinates/type:]]. Default mountain	String	optional
Region	`region_code`	Either a two character ISO 3166-1 alpha-2 country code or an ISO 3166-2 region code. See [[Wikipedia:COORD REGION]].	Line	optional
Source	`source`	The source of the coordinate data. See [[Wikipedia:COORD SOURCE]].	String	optional
Format	`format`	Format to display degrees in the coordinate listing. dms for degree, minutes, second output (the default), or dec for decimal degree output. Default dms	Line	optional
Coordinates ref	`coordinates_ref`	For any references regarding the coordinates reported. <ref> </ref> tags must be used.	String	optional
Type	`type`	The type of mountain — see List of mountain types.	Line	optional
Age	`age`	Age of the rock. Geologic time scales may be useful here.	Line	optional
Volcanic arc	`volcanic_arc`	If the mountain is a volcano, arc in which it is situated.	String	optional
Volcanic belt	`volcanic_belt`	If the mountain is a volcano, belt in which it is situated.	String	optional
Volcanic field	`volcanic_field`	If the mountain is a volcano, field in which it is situated.	String	optional
Volcanic arc/belt	`volcanic_arc/belt`	If the mountain is a volcano, arc/belt in which it is situated.	String	optional
Last eruption	`last_eruption`	The date of the last eruption if the mountain is of volcanic origin. Only use Unknown if a verifiable source such as the Global Volcanism Program states it as such.	String	optional
First ascent	`first_ascent`	Date of the first ascent, if known. Typically, this is the first recorded ascent but not necessarily the first true ascent. If it is quite probable the peak/mountain was ascended by local people before then, a footnote should be added.	String	optional
Easiest route	`easiest_route`	The easiest route to the summit. Some possibilities include Hike, Scramble or any of the YDS grades.	String	optional
Embedded	`embedded`	Another Infobox to place within the mountain infobox. The other infobox will show up at the end of the mountain infobox. The other infobox needs to have its "embed" or "child" parameter set to 1 or yes, as appropriate.	String	optional
Child	`child`	"yes" if the mountain infobox is embedded inside another Infobox	Line	optional
Map width	`map_size` `map_width`	Width of the map, in pixels. Must be entered as a number. The default value is 250. Default 250	Number	optional
Photo size	`photo_size`	Width of the photo, if less than 280px.	Number	optional

Sample Wikidata items

This list is incomplete; you can help by expanding it.

Tracking categories

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

adr
agent
category
county-name
extended-address
fn
label
locality
nickname
note
org
region
street-address
uid
url
vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

geo
latitude
longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.